The ducting has a 60 mm inside diameter and a flexible corrugated construction that allows it to be routed through compatible vehicle and equipment installations. It can be used with properly sized heater outlets, hose flanges, air vents, connectors and clamps.

Part 102114310000 is also formatted as Eberspächer part number 10.2114.31.0000. BTRAC supplies this ducting by the meter, allowing installers to order the length required for a particular heating system.

The ducting uses an APK-style layered construction consisting of a heat-reflective aluminum inner layer, a flexible paper center layer and a protective plastic outer layer.

This 60 mm air duct is commonly associated with compatible Airtronic heater installations, including certain Airtronic D2 applications. Compatibility depends on the heater outlet diameter and the remaining air-distribution components.

A complete installation may also require the 201577890601 60 mm hose flange, compatible air outlets, branch fittings and appropriately sized clamps.

Always confirm the required duct diameter, length and heater configuration before ordering.

Key Features

• Flexible warm-air distribution ducting
• 60 mm inside diameter
• Designed for compatible auxiliary air-heater systems
• Flexible corrugated construction
• Can be routed through vehicle and equipment installations
• APK-style layered duct construction
• Heat-reflective inner layer
• Protective plastic outer layer
• Compatible with properly sized outlets, flanges and connectors
• Suitable for new installations and replacement applications
• Sold by the meter
• Maximum continuous length may be limited by available supply

Specifications

• Part Number: 102114310000
• Formatted Eberspächer Number: 10.2114.31.0000
• Product Type: Flexible warm-air ducting
• Inside Diameter: 60 mm
• Construction Type: Flexible APK-style duct
• Inner Layer: Heat-reflective aluminum
• Center Layer: Flexible paper material
• Outer Layer: Plastic
• Color: Black exterior
• Primary Function: Warm-air distribution
• Heater Type: Diesel-fired air heater
• Brand Application: Eberspächer/ESPAR
• Unit of Measure: Meter
• Maximum Continuous Length: Up to 10 meters, subject to availability
• Condition: New

Compatible Eberspächer/ESPAR Applications

Part 102114310000 may be used in compatible:

• Airtronic D2 heater installations
• Other Airtronic heaters using 60 mm ducting
• Truck sleeper-heater systems
• Work-truck heating systems
• Construction-equipment heater installations
• Agricultural-equipment heater installations
• RV and motorhome heating systems
• Marine cabin-heating systems
• Trailer and mobile-workspace heating systems
• Replacement warm-air distribution assemblies

Compatibility depends on the heater outlet, required airflow and complete air-distribution configuration.

Common Applications

This flexible air duct may be used when:

• Installing a new diesel-fired air heater
• Routing warm air from the heater to an outlet
• Replacing damaged or deteriorated ducting
• Extending a compatible warm-air distribution system
• Connecting a heater to a 60 mm air outlet
• Connecting a heater to a compatible hose flange
• Routing heated air into a truck cab or sleeper
• Distributing warm air in equipment, RVs or mobile workspaces
• Repairing an existing Airtronic heater installation

Ordering Information

Part 102114310000 is sold by the meter.

Enter the total number of meters required as the order quantity.

• Quantity 1 equals 1 meter
• Quantity 2 equals 2 meters
• Quantity 3 equals 3 meters
• Quantity 10 equals 10 meters

The ordered quantity should be supplied as one continuous length when available. Maximum continuous length may be limited to 10 meters.

Important Installation Notes

• Confirm that the installation requires 60 mm inside-diameter ducting.
• Confirm the heater outlet and air-distribution component sizes.
• Plan the duct route before cutting the material.
• Keep the routing as short and direct as practical.
• Avoid excessive bends that may restrict airflow.
• Do not crush, sharply kink or flatten the ducting.
• Protect the duct from sharp edges and moving components.
• Keep the duct away from surfaces that exceed its intended operating conditions.
• Use compatible flanges, outlets, connectors and clamps.
• Secure the ducting so it cannot move or become disconnected.
• Inspect existing ducting for crushing, separation or internal restrictions.
• Confirm that all warm-air outlets remain unobstructed.
• Test airflow and heater operation after completing the installation.
• Installation should be performed by a technician familiar with auxiliary air-heater systems.

Related Products

• 201577890601 – Eberspächer/ESPAR 60 mm Hose Flange
• 416816 – Eberspächer/ESPAR Airtronic D2 12V Combustion-Air Blower
• 417745 – Eberspächer/ESPAR Airtronic D2 Flame Tube
• 417745AM – Eberspächer/ESPAR Airtronic D2 Aftermarket Flame Tube and Gasket
• 334181 – Eberspächer/ESPAR Airtronic D2 Burner Gasket
• 334183 – Eberspächer/ESPAR Airtronic D2 Blower Gasket
• 420453 – Eberspächer/ESPAR Airtronic D2/D4 12V Glow Pin
• 416824 – Eberspächer/ESPAR Airtronic D2/D4 12V Fuel-Metering Pump
• 925040 – Eberspächer/ESPAR Airtronic D2 Combustion-Air Intake Hose
• DH-E1000-MAINT – Eberspächer/ESPAR Airtronic D2 12V Maintenance Kit