Dometic ProHeat X30 Compressor Air Filter Element
The Dometic ProHeat 953420K Air Filter Element is the factory replacement filter used in the compressor assembly of the ProHeat X30 diesel-fired coolant heater.
The X30 uses a dedicated compressor as part of its combustion and fuel-delivery system. The 953420K filter element sits beneath the compressor air filter cover and helps keep contaminants from entering the compressor assembly. ProHeat identifies 953420K as Item 7, “Element, Air Filter,” in the official X30 compressor parts diagram.
Key Features
- Genuine Dometic ProHeat replacement component
- Factory part number 953420K
- Designed for the ProHeat X30
- Replacement compressor air filter element
- Helps protect the compressor from airborne contamination
- Supports proper compressor airflow
- Simple service replacement
- Installs beneath the factory X30 air filter cover
Why the Compressor Air Filter Matters
The ProHeat X30 uses an air compressor as part of the heater’s combustion system.
Keeping the compressor air supply clean helps reduce contamination inside the compressor and related components. A dirty, damaged, or restricted filter can interfere with proper airflow and should be inspected when servicing the compressor system.
Replacing the filter element helps:
- Protect the compressor assembly
- Reduce dirt and debris entering the air system
- Maintain unrestricted compressor airflow
- Support consistent heater operation
- Protect related combustion components
Compatibility
- Manufacturer: Dometic ProHeat
- ProHeat Part Number: 953420K
- BTRAC Part Number: PH-953420K
- Product Type: Compressor Air Filter Element
- Heater Family: ProHeat X30
- Assembly Location: Compressor assembly
- Application: Replacement / maintenance component
The current ProHeat X30 single-fuel-line parts catalog confirms 953420K as the compressor air filter element. That catalog covers X30 heaters with serial number X3H18017001 and above.
For earlier X30 dual-fuel-line heaters, verify the existing filter part number before ordering. ProHeat maintains separate service and parts documentation for the earlier and later X30 configurations.
Compressor Assembly Location
The 953420K filter element is installed directly in the X30 compressor assembly beneath the removable air filter cover.
The surrounding factory components include:
- 149309K – Compressor Assembly
- 149324K – Air Filter Cover Kit
- 149312K – Compressor Wire Clip
- 149329K – Compressor-to-Fan-End Seal
- 829325K – Compressor Test Port Plug
- 207012K – M5 × 0.8 × 12 Screws
- 850232K – Compressor Fastener Kit
These surrounding components are sold separately unless otherwise specified.
Installation and Maintenance Notes
Inspect the compressor air filter whenever servicing the X30 compressor or combustion system.
When replacing the filter:
- Shut the heater down completely
- Allow the heater to complete its cool-down cycle
- Disconnect vehicle power where required
- Remove the compressor air filter cover
- Inspect the filter element for dirt, damage, or restriction
- Inspect the filter housing for contamination
- Install the replacement element correctly beneath the cover
- Reinstall and secure the air filter cover before operating the heater
If the heater is experiencing compressor airflow or combustion-related issues, inspect the air filter along with the surrounding compressor components before replacing larger assemblies.
Product Specifications
- BTRAC SKU: PH-953420K
- Manufacturer: Dometic ProHeat
- Manufacturer Part Number: 953420K
- Product Type: Air Filter Element
- Compatible Heater: ProHeat X30
- System: Compressor / combustion air system
- Assembly Location: Compressor
- Service Type: Replacement / maintenance
- Filter Cover Included: No
- Compressor Included: No
Related ProHeat Parts
- PH-149309K – X30 Compressor Assembly
- 149324K – X30 Air Filter Cover Kit
- 149329K – Compressor-to-Fan-End Seal
- 829325K – Compressor Test Port Plug
- 850232K – Compressor Fastener Kit


Reviews
There are no reviews yet.