Eberspächer/ESPAR 416816 Airtronic D2 12V Combustion-Air Blower Motor

$372.17

The Eberspächer/ESPAR 416816 combustion-air blower motor is a 12-volt replacement assembly for compatible first-generation Airtronic D2 diesel air heaters. It crosses to Eberspächer part number 252069992000 and should be installed … Read more

Special Order – Please allow additional lead time

SKU: 416816 Category: Brand:

The Eberspächer/ESPAR 416816 combustion-air blower motor is a replacement assembly for compatible 12-volt Airtronic D2 diesel-fired air heaters.

The blower is part of the heater’s combustion system. Part 416816 crosses to Eberspächer part number 252069992000, also formatted as 25.2069.99.2000.

This blower motor is intended for compatible first-generation 12-volt Airtronic D2 heaters. It is not the correct replacement for 24-volt D2 heaters or newer Airtronic S2 D2L heater models.

The 334183 Airtronic D2 blower gasket should be inspected and replaced as needed when installing the blower. Other related D2 combustion components include the 417745 flame tube, 334181 burner gasket, 420453 glow-pin assembly and 416820 flame and overheat sensor.

Always verify the heater model, voltage and identification number before ordering. Similar Eberspächer heater models may use different blower assemblies.

Key Features

  • Replacement combustion-air blower motor
  • Designed for compatible first-generation Airtronic D2 heaters
  • 12-volt electrical configuration
  • Crosses to Eberspächer part number 252069992000
  • Directly related to the D2 combustion system
  • Suitable for professional heater repair and rebuilding
  • Pairs with the 334183 blower-motor gasket
  • Compatible with related D2 burner, sensor and ignition components
  • New replacement assembly

Specifications

  • BTRAC Part Number: 416816
  • Eberspächer Part Number: 252069992000
  • Formatted Eberspächer Number: 25.2069.99.2000
  • Alternate Reference: 252069200200
  • Product Type: Combustion-air blower motor
  • Voltage: 12V
  • Heater Type: Diesel-fired air heater
  • Heater Family: Airtronic D2
  • Heater Generation: First-generation Airtronic D2
  • Primary Function: Supplies combustion air within the heater
  • Installation Location: Internal heater combustion assembly
  • Brand Application: Eberspächer/ESPAR
  • Condition: New replacement part
  • Unit of Measure: Each
  • Gasket: Sold separately unless explicitly included

Compatible Eberspächer/ESPAR Heaters

Part 416816 is intended for compatible:

  • Eberspächer Airtronic D2 12V heaters
  • ESPAR Airtronic D2 12V heaters
  • First-generation Airtronic D2 12V configurations
  • Heater systems using Eberspächer blower motor 252069992000

This blower is not intended for:

  • Airtronic D2 24V heaters
  • Airtronic S2 D2L heaters
  • Applications requiring a different blower part number
  • Heaters that have not been positively identified

Confirm compatibility using the heater identification label and complete heater number before ordering.

Common Service Applications

The blower motor may be replaced when:

  • The blower motor does not operate
  • The blower operates intermittently
  • The blower is physically damaged
  • The motor or fan assembly is worn
  • Internal inspection identifies blower damage
  • The heater is undergoing a comprehensive rebuild
  • Combustion-system service requires blower replacement
  • A technician has diagnosed the blower as the failed component

A heater fault, shutdown or no-start condition does not automatically confirm blower failure. The complete heater should be properly diagnosed before replacement parts are ordered.

Important Installation Notes

  • Confirm that the heater operates on 12 volts.
  • Confirm that the heater is a compatible first-generation Airtronic D2.
  • Disconnect electrical power and fuel before servicing the heater.
  • Inspect the electrical connector and wiring before installation.
  • Inspect the blower wheel and surrounding housing for debris or damage.
  • Inspect the 334183 blower-motor gasket during disassembly.
  • Replace damaged, compressed or deteriorated sealing components.
  • Inspect the flame tube and burner components while the heater is open.
  • Clean the mating surfaces before reassembly.
  • Do not substitute a 24-volt blower motor.
  • Reassemble the heater according to the applicable service procedures.
  • Test heater operation after completing the repair.
  • Heater service should be performed by a technician familiar with diesel-fired air heaters.

Related Products

  • 334183 – Eberspächer/ESPAR Airtronic D2 Blower-Motor Gasket
  • 417745 – Eberspächer/ESPAR Airtronic D2 Flame Tube
  • 417745AM – Eberspächer/ESPAR Airtronic D2 Aftermarket Flame Tube and Gasket
  • 334181 – Eberspächer/ESPAR Airtronic D2 Burner Gasket
  • 420453 – Eberspächer/ESPAR Airtronic D2 Glow-Pin Assembly
  • 416820 – Eberspächer/ESPAR Airtronic D2 Flame and Overheat Sensor
  • 416824 – Eberspächer/ESPAR D2/D4 Fuel-Metering Pump
  • 925040 – Eberspächer/ESPAR Airtronic D2 Combustion-Air Intake Hose
  • DH-E1000-MAINT – Eberspächer/ESPAR D2 12V Maintenance Kit

Reviews

There are no reviews yet.

Be the first to review “Eberspächer/ESPAR 416816 Airtronic D2 12V Combustion-Air Blower Motor”

Your email address will not be published. Required fields are marked *