Flexible 60mm Ducting for Webasto Air Heaters

The Webasto 5000318A Flexible Warm Air Duct Hose is designed to route heated air through compatible Webasto vehicle heating systems.

With a 60mm inside diameter and 10-meter length, this flexible ducting provides the installer with the material needed to route warm air from the heater to air outlets positioned throughout a truck cab, sleeper compartment, commercial vehicle, or other compatible heated space.

Flexible ducting is an important part of a properly configured Webasto air-heating system because the location of the heater and the areas requiring heat are often separated by vehicle structures, interior panels, or other equipment.

Build a Complete 60mm Air-Distribution System

Webasto air-heating systems can be configured with multiple air-distribution components depending on the vehicle and desired heating arrangement.

The 60mm Webasto warm-air ducting can be combined with a 60mm warm-air outlet to direct heated air into the cab or sleeper.

For installations requiring heated air at multiple locations, a 60 x 60 x 60mm Y-duct can be incorporated into the air-distribution system to divide airflow between separate duct runs.

Additional connectors, adapters, outlets, and shorter sections of 60mm flexible heater ducting can be used to customize the system around the vehicle’s interior layout.

Ideal for Air Top 2000 STC Heating Systems

The Webasto 5000318A duct hose provides an important air-distribution option for compatible Webasto air-heater installations.

In an Air Top 2000 STC diesel sleeper heater system, heated air generated by the heater must be routed into the cab or sleeper compartment. Compatible 60mm ducting provides the path between the heater and the selected warm-air outlet.

This makes the duct hose a natural supporting component for truck sleeper heating installations where the heater may be mounted away from the final air outlet.

For applications using other Webasto heater models, always verify the required duct diameter and permissible air-distribution configuration before selecting components.

Route Heat to Multiple Locations

Vehicle heating requirements vary significantly from one installation to another.

A simple installation may use one run of 60mm heater ducting connected to a single Webasto 60mm warm-air nozzle.

More complex installations can incorporate a Webasto 60mm Y-duct to divide airflow between multiple sections of the vehicle.

Building the air-distribution system from compatible ducting, fittings, and outlets gives installers greater flexibility in positioning the heater while still directing warm air toward the areas where heat is needed.

Repair Existing Webasto Air Ducting

The Webasto 5000318A duct hose is also useful when repairing or reconfiguring an existing warm-air distribution system.

Air ducting can require replacement when existing hose becomes damaged or an installation is being modified.

When servicing an existing heating system, inspect the warm-air outlets, duct connections, Y-fittings, adapters, and surrounding air-distribution components while replacing damaged ducting.

Replacing worn or damaged components together can help restore the physical integrity of the warm-air distribution system.

Part of a Complete Webasto Heating System

Warm-air ducting is only one portion of a complete vehicle heating installation.

BTRAC carries a growing selection of Webasto air-heater parts and installation components, including:

• Webasto diesel air heaters
• Flexible warm-air ducting
• 60mm warm-air outlets
• 60mm Y-ducts and air-distribution fittings
• Fuel pumps
• Diesel heater fuel line
• Fuel filters
• Fuel tank standpipes
• Heater controls
• Wiring and electrical components
• Burner and service components
• Diagnostic equipment

For truck sleeper applications, this ducting can form part of the air-distribution system supporting a compatible Webasto Air Top 2000 STC 12V diesel sleeper heater.

KEY FEATURES

• Genuine Webasto air-distribution component
• Webasto part number 5000318A
• Flexible warm-air duct hose
• 60mm inside diameter
• 10-meter length
• Designed for compatible Webasto air-heating systems
• Routes heated air from the heater to air outlets
• Compatible with appropriately sized Webasto air-distribution components
• Supports single or multiple-outlet heating configurations
• Flexible routing for vehicle installations
• Suitable for installation, repair, or system reconfiguration
• Strong companion product for Webasto 60mm air outlets and Y-ducts

TECHNICAL SPECIFICATIONS

APPLICATIONS

The Webasto 5000318A warm-air duct can be used as part of compatible 60mm Webasto air-distribution systems.

Potential applications include:

• Truck sleeper heating
• Commercial truck cabs
• Vocational vehicles
• Service vehicles
• Mobile workspaces
• Commercial vehicle interiors
• Replacement air-heater ducting
• Custom warm-air distribution systems

Always verify the heater’s required duct dimensions and allowable air-distribution configuration before installation.

IMPORTANT ORDERING INFORMATION

BTRAC SKU: W-5000318A
Webasto Part Number: 5000318A

This product is flexible warm-air ducting and is not a complete heater.

Verify the required duct diameter before ordering.

Air outlets, Y-fittings, adapters, connectors, clamps, and other installation components may be required depending on the air-distribution layout.

When servicing an existing system, verify the heater model and existing duct dimensions before replacing components.