Flexible 60mm Ducting for Webasto Air Heaters

The Webasto 5000316A Flexible Warm Air Duct is designed to route heated air through compatible Webasto vehicle heating systems.

With a 60mm diameter and 2-meter length, this flexible duct provides a practical way to connect an air heater with the warm-air outlets and distribution fittings positioned throughout a truck cab, sleeper compartment, work vehicle, or other compatible heated space.

Flexible heater ducting allows the air-distribution system to be routed around vehicle structures, interior panels, equipment, and other installation constraints while moving heated air toward the areas where it is needed.

Build a Complete 60mm Webasto Air-Distribution System

The Webasto 5000316A can be combined with other Webasto 60mm air-distribution components to create a complete warm-air routing system.

For a basic installation, the duct can carry heated air directly from the heater toward a compatible 60mm Webasto warm-air outlet.

For installations requiring heat in more than one location, a 60 x 60 x 60mm Webasto Y-duct can divide the airflow into two separate duct runs.

Additional sections of 60mm flexible warm-air ducting can then carry heated air from the Y-duct toward separate outlets.

This modular approach allows the warm-air system to be configured around the individual vehicle rather than limiting the installation to a single heater and outlet location.

Ideal for Air Top 2000 STC Heating Systems

The Webasto 5000316A is particularly useful when building or servicing a compatible Webasto Air Top 2000 STC heating system using 60mm air distribution.

In a truck sleeper installation, heated air produced by the Webasto Air Top 2000 STC 12V diesel sleeper heater must be routed from the heater into the occupied portion of the cab or sleeper.

The 2-meter duct length provides a useful option for installations that need more routing flexibility than a short duct section without requiring a longer bulk section of warm-air hose.

For other Webasto air heaters, always verify the required duct diameter and air-distribution configuration before ordering installation components.

Connect Directly to Warm-Air Outlets

A compatible Webasto 60mm rotatable warm-air outlet can be positioned at the end of the duct run to direct heated air toward the desired area of the vehicle.

Combining flexible ducting with adjustable outlets gives installers greater control over both the location and direction of heated airflow.

For systems with multiple air outlets, compatible Webasto 60mm Y-ducts can be used to create additional branches within the warm-air distribution system.

Multiple Duct Lengths for Different Installations

BTRAC carries multiple lengths of Webasto 60mm flexible heater ducting to support different installation requirements.

The 2-meter Webasto 5000316A provides a versatile intermediate length.

For shorter connections, a 60mm x 0.5m flexible warm-air duct may provide the appropriate amount of material.

For larger installations or shops building multiple heating systems, 60mm x 10m Webasto warm-air ducting provides additional material for longer runs and custom configurations.

These different lengths allow installers and service technicians to select the amount of ducting appropriate for the job.

Repair or Reconfigure Existing Air Ducting

The Webasto 5000316A can also be used when servicing or changing an existing compatible heater air-distribution system.

When replacing damaged ducting, inspect the surrounding warm-air outlets, Y-ducts, fittings, connections, and other air-distribution components.

Existing ducting that has been damaged, improperly routed, or removed during other vehicle repairs may require replacement or reconfiguration before returning the heating system to service.

Part of a Complete Webasto Heating System

BTRAC carries a growing selection of Webasto air-heater parts and installation components for complete heater installations and service work, including:

• Webasto diesel air heaters
• 60mm flexible warm-air ducting
• Warm-air outlets
• Air-distribution Y-ducts
• Duct fittings and adapters
• Fuel pumps
• Diesel heater fuel line
• Fuel filters
• Fuel tank standpipes
• SmarTemp heater controls
• Wiring and electrical components
• Burner and service components
• Diagnostic equipment

For truck sleeper applications, the Webasto 5000316A can form part of the air-distribution system supporting a compatible Webasto Air Top 2000 STC diesel sleeper heater.

KEY FEATURES

• Genuine Webasto component
• Webasto part number 5000316A
• Flexible warm-air ducting
• 60mm diameter
• 2-meter length
• Designed for compatible Webasto air-heating systems
• Suitable for Air Top 2000 series air distribution
• Routes heated air between heater and outlets
• Compatible with appropriately sized Webasto air-distribution fittings
• Works with compatible 60mm warm-air outlets
• Supports single and multi-outlet configurations
• Flexible routing for vehicle installations
• Suitable for new installations
• Useful for replacement and repair applications

TECHNICAL SPECIFICATIONS

APPLICATIONS

The Webasto 5000316A can be used as part of compatible 60mm Webasto warm-air distribution systems.

Potential applications include:

• Air Top 2000 series heating systems
• Truck sleeper heating systems
• Commercial truck cabs
• Vocational vehicles
• Service vehicles
• Mobile workspaces
• Commercial vehicle interiors
• Replacement heater ducting
• Custom warm-air distribution systems
• Multi-outlet heater installations

Always verify the heater model, duct diameter, and required air-distribution configuration before installation.

IMPORTANT ORDERING INFORMATION

BTRAC SKU: W-5000316A
Webasto Part Number: 5000316A

This product is flexible warm-air ducting and is not a complete heater.

Verify that the heating system requires 60mm ducting before ordering.

Warm-air outlets, Y-ducts, adapters, fittings, and other installation components may be required depending on the air-distribution layout.