BT3-0107 Fan – 12 Inch PL, 12V

The BTRAC BT3-0107 axial fan supports mobile HVAC and equipment cooling systems that operate on 12-volt electrical platforms. It is based on the SPAL VA10-AP9/C-25A platform and uses a 12-inch (305 mm) low-profile axial design to move air efficiently across condensers, radiators, and heat exchangers.

Because the fan uses a sealed, waterproof motor rated to IP68, it performs reliably in environments exposed to moisture, road spray, dust, and vibration. As a result, it works well in on-highway trucks, off-highway equipment, and vocational vehicles. In addition, the waterproof electrical connector helps protect the wiring connection and supports long-term reliability.

The fan supports both puller (suction) and pusher (blowing) configurations depending on installation orientation. Therefore, it adapts easily to a wide range of cooling layouts. The low-profile housing also helps simplify installation in tight engine bays and HVAC compartments.

Furthermore, SPAL airflow testing shows strong airflow across a range of static pressures, which supports consistent cooling performance under real-world operating conditions. Because of this, the BT3-0107 is a dependable replacement option for OEM and aftermarket cooling fans.

Specifications

Electrical

• Voltage: 12V DC

• Test Voltage: 13V DC

Fan & Performance

• Fan Type: Axial

• Diameter: 12 in (305 mm)

• Configuration: Puller or pusher (installation dependent)

• Profile: Low profile (PL)

Construction

• Motor Type: Sealed, waterproof

• Ingress Protection: IP68

• Connector: AMP connector, Code 180908

• Terminal Type: AMP terminal Code 42098-2

• Vent Style: Sealed motor

Physical

• Approximate Weight: 1.1 kg (2.4 lb)

• Recommended Mounting Torque:

  • 3 Nm (+1 / -0) using M5 fasteners

Cross Reference Numbers

30100375
VA10-AP9/C-25A

Important Notes

• Designed for 12-volt mobile HVAC and cooling systems

• IP68 waterproof motor supports harsh operating environments

• Low-profile design helps fit tight installations

• Fan can operate as puller or pusher depending on mounting orientation

• Always verify mounting depth, airflow direction, and electrical compatibility before installation