BT5-46609 Compressor — Denso 10PA17C, 12V, PV8 145 mm Clutch (Red Dot RD‑5‑14079‑0P)

Description

Overview

The BT5-46609 is a Red Dot / Denso‑style 10PA17C compressor designed for heavy‑duty off‑road and agricultural HVAC systems. It ships new with a PV8 clutch and is a direct replacement for multiple John Deere OEMs and Denso factory numbers used across tractors, loaders, sprayers, combines, and more.

Key Features

• Compressor model: Denso 10PA17C
• Voltage: 12 V
• Clutch: PV8 serpentine, 145 mm diameter
• Mount type: Direct mount (manifold required; not included)
• Refrigerant: R134a
• Oil type / fill: PAG46 / ND8, typical 7.7 oz (230 cc)*
  *Always verify and adjust oil amount for your specific system after component replacement.

Technical Specifications

• BTRAC Part #: BT5-46609
• Red Dot / Aftermarket #s: 75R9052, 75R9052D; Red Dot factory RD‑5‑14079‑0P / RD‑5‑14079‑1P
• Head / style: 10PA (body ports use separate manifold)
• Grooves: 8‑groove PV pulley (serpentine)
• Common equivalents: Denso 10PA17C assemblies used on John Deere platforms; exact fit depends on manifold orientation.

Interchange & Cross‑Reference

Cross‑refs:
BT5-46609, 75R9052, RE46609, TY24304, TY6764, AH169875, AN221429, 447200-4932, 447200-4930, 447200-5031, 20-21715, 77375, 0020, 03-3163, 0661, 10360321, 14-0076, 14-0076NC, 14-0076NEW, 14-0076NIP, 1522049, 20-21715-AM, 295693NA, 3021961, 447100-2380, 447100-2381, 447100-2388, 447170-2400, 447200-3084, 447200-3667, 5479, 5511635, 5512671, 5512675, 5832, 6511635, 6512671, 6512675, 7511635, 7512671, 7512675, 78375, 886, 967265, 975853, ABP N83 304910, ACC1262, C1703, CO1026CA, SE501402, TEM967265, TEM975853, TL300-3805, 503-140, 451-1180

Equipment Fitment Highlights (John Deere)

The 10PA17C compressor under part numbers RE46609 / TY24304 is used across numerous John Deere tractors (7000/8000 series), backhoe loaders (310G/410G), sprayers (4710/4920), skidders, combines, and more. Representative fitment lists include models such as 7200, 7210, 7400, 7510, 7600, 7720, 7815, 7820, 7920, 8100/8110/8120/8130, 8200/8210/8220/8230, 8300/8310/8320/8330, 8400/8410/8420/8430, 8520/8530, and additional equipment. Always match by part number/manifold.

📋 What’s Included

• New BT5-46609 compressor assembly with clutch (PV8, 145 mm)
• Manifold not included (reuse your existing manifold that matches port orientation).

🛠️ Installation Notes

1. Flush the system (condenser, evaporator, lines) and replace receiver‑drier/accumulator.
2. Inspect/replace expansion valve or orifice as needed.
3. Evacuate and charge with R134a to spec; set oil type PAG46/ND8 and quantity per service manual.
4. Verify belt alignment (PV8) and clutch air gap.