BT3-0120 Fan – 16 Inch PL, 12V

Description

The BTRAC BT3-0120 axial fan is built for mobile HVAC and equipment cooling systems operating on 12-volt electrical platforms. It is based on the SPAL VA18-AP13-59A platform and uses a 16-inch (385 mm) low-profile axial design to move large volumes of air across condensers, radiators, and heat exchangers.

Because the fan uses a sealed motor with IP68 ingress protection, it performs reliably in environments exposed to moisture, dust, vibration, and road spray. As a result, it works well in on-highway trucks, off-highway equipment, and vocational vehicles. In addition, the waterproof AMP connector helps protect the electrical connection and supports long-term reliability.

The fan supports both puller (suction) and pusher (blowing) configurations depending on mounting orientation. Therefore, it adapts easily to a wide range of cooling layouts. The low-profile housing also helps simplify installation in tight engine bays and HVAC compartments where clearance is limited.

Furthermore, SPAL performance testing shows strong airflow across a range of static pressures, which supports consistent cooling under real-world operating conditions. Because of this, the BT3-0120 is a dependable replacement option for OEM and aftermarket axial cooling fans used in high-load mobile HVAC systems.

---

Specifications

Electrical

• Voltage: 12V DC

• Test Voltage: 13V DC

Fan & Performance

• Fan Type: Axial

• Diameter: 16 in (385 mm)

• Configuration: Puller or pusher (installation dependent)

• Profile: Low profile (PL)

Construction

• Motor Type: Sealed, waterproof

• Ingress Protection: IP68

• Connector: AMP connector (Code 180908)

• Terminal Type: AMP terminal (Code 42098-2)

Physical

• Approximate Weight: 2.57 kg (5.7 lb)

• Recommended Mounting Torque:

  • 3 Nm (+1 / −0) using M5 fasteners

---

Cross Reference Numbers

30102049
VA18-AP13-59A

---

Important Notes

• Designed for 12-volt mobile HVAC and cooling systems

• IP68 waterproof motor supports harsh operating environments

• High-airflow 16-inch axial fan for demanding cooling loads

• Fan can operate as puller or pusher depending on mounting orientation

• Always verify mounting depth, airflow direction, and electrical compatibility before installation